Paint Sprayer Gun Maintenance Tips
... after each use. To keep all movable parts lubricated, use mineral spirits or a cleaner/flushing agent recommended by the manufacturer. Before winter comes around, be sure to remove all paint from the sprayer and then proceed to flush the pump with the one of the previously mentioned cleaning solutions. This will prevent the suction and delivery systems from cracking. As for maintaining individual parts, replace the spray tip when signs of wear and tear begin to appear. Additionally, don't forget to clean all inline filters in the delivery system, inspect the metal screen system and replace strainers when it begins ... or clogged. Also check the length and width of the hose you're using with the sprayer. A hose half an inch wide measuring over 100 feet long will significantly lower the performance of the sprayer. For optimal performance, it's best to use a 3/8-inch hose. Excessive Paint Leakage into Throat Packing Nut: • Remove the throat packing nut spacer. If leakage continues, consider tightening the nut slightly. Pump Prime Difficulty: • Check and tighten all fluid connections. Also try reducing the engine speed, proceeding to cycle the pump slowly while priming to get rid of any air that might ...
Tags: paint sprayer repair | tool repair | power tool repair | authorized repair maintenance |
Tags: paint sprayer repair | tool repair | power tool repair | authorized repair maintenance |